本商品は海外拠点に在庫がございます。そのためお届けまで2〜3週間いただいております。税関手続き、関税支払い等すべて当方で対応させていただいております。尚、税関での確認のため化粧箱が開封されることがあります。また、国際輸送が伴いますので化粧箱に痛みが生じる場合がございますので、予めご了承お願い致します。
商品説明
Convert from 5 lug vehicle to 6 lug wheels
CNC machined from 6061 T6 aircraft quality billet
Fit on 5x150 bolt pattern vehicle
Allow fitment to 6x5.5 bolt pattern wheel
Sold by pair
説明:
Product Information:
These two piece conversion type wheel adapters are used to convert 5 lug 150mm bolt pattern hub to fit wheels of 6 lug 5.5-inch (139.7mm) bolt pattern. Adapters are built with 78mm hub centric lip. If your wheel has 100mm bore, the hub centric rings can help center on the lip for a factory fit. They will space out your wheels for 2-inch. Check to make sure you have enough clearance. CNC machined with precision craftsmanship using 6061 T6 aerospace quality billet, featured in high load capacity and corrosion resistance. High quality studs are pre-installed. Sold as a pair for 2 wheels. Order 2 pairs for all 4 wheels.
Hub centric design for a snug fit on both the vehicles and factory wheels listed below. Significantly reduces stress on bearings and chance of vibrations.
Snug Fit on the Following Vehicles/Axles with 110mm Hub:
Toyota: 5 lug Tundra, Land Cruiser (98-on), Sequoira (08-on)
Lexus: LX470, LX570
Hub Centric Fit with Hub Centric Rings for Factory Wheels (or 100mm Bore wheels) from These Vehicles:
Nissan Xterra (00-04), Frontier (87-04), Pathfinder (87-04), Pickup (78-86)
**Even if your 6x5.5 bolt pattern wheels have a different bore, the adapters are still going to work and it is possible to get a snug fit by using a different set of hub centric rings.
Adapter Specification:
Vehicle Bolt Pattern: 5x150mm
Wheel Bolt Pattern: 6x5.5-inch (139.7mm)
Studs Thread Size: 12x1.5
Hub Bore Size: 110mm
Hub Centric Lip: 78mm
Thickness: 2-inch (50mm)
Lug Torque: 95 ft-lbs
Black Allen Bolt Torque: 55 ft-lbs
Hub Centric Ring OD 100mm
Hub Centric Ring ID 78mm
Technical Notes:
If hub studs protrude outside the inner adapter piece and prevent the outer adapter piece from sitting flush, it is required to shorten the factory studs.
本商品は海外拠点に在庫がございます。そのためお届けまで2〜3週間いただいております。税関手続き、関税支払い等すべて当方で対応させていただいております。尚、税関での確認のため化粧箱が開封されることがあります。また、国際輸送が伴いますので化粧箱に痛みが生じる場合がございますので、予めご了承お願い致します。
カテゴリー:
メーカー: E Century
ブランド: ezaccessory
高さ: 29.2 センチ
幅: 33.7 センチ
奥行: 6.0 センチ
重量: 6.8 Kg